FoxAlien x Woodmads CNC Router WM3020
SKU: CNC-WM-WM3020 |
[Designed to work precisely] The WM3020 CNC is built in HG-15 linear bearings and 12mm ballscrews on every axis. These components can help the carving faster, quieter, and more precisely.
[Easy Installation] Main parts are pre-assembled, it just takes 30-45 minutes to assemble the machine, then you can explore the journey of CNC machining.
[Simple to Use] Still based on grbl control, lots of resources can be found on YouTube. Due to its super-rigid structure, no more loss step. Even though your engraving settings are not perfect, it can still carve nicely.
[Easy to Upgrade] The machine comes with a 300W spindle, which can capable of engraving and cutting wood, acrylic, carbon fiber, aluminum and brass. The design of the z-axis module can install the 65mm and 69mm clamp, which means it can compatible with the Makita RT0701C, 1.5kw spindle, and DeWalt DWP611 Router.
[Aluminum Working Table] One-piece machined and molded aluminum design ensures the flatness and strength of the work platform. An integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market.
*The CA, AU order of the WM3020 will be shipped from the China warehouse by sea. It might take 30-45 days for the delivery.
The WM-3020 is a brand new CNC machine that is-designed by FoxAlien and WoodMads. WoodMads is a start-up team devoted to CNC machines. We are very honored to be invited to participate in designing this new model; and FoxAlien becomes the exclusive distributor of the WM-3020.
- Working Table: Aluminum
- Cutting Area: 290x220x70mm/ 11.4“x8.6"x2.7"
- Spindle: 300W
- Router: Support 65mm and 69 Router, Makita RT0700C and DeWalt DWP611 (clamp is not included)
- Dual X Axis: HG-15 Linear Rails & 12mm Ball Screws & 2 Slide Blocks
- Dual Y Axis: HG-15 Linear Rails & 12mm Ball Screws & 4 Slide Blocks
- Dual Z Axis: HG-15 Linear Rails & 12mm Ball Screws & 2 Slide Blocks
- Stepper Motors: Nema17
- Driver Chip: TB67S109AFTG
- Machine Structure Material: All Metal
- 1x CNC Router Machine (Main part pre-installed)
- 1x Z Probe
- 1x Controller Box
- 4x Hold-down Clamp
- 1x Power Supply
- 1x USB Cable
- 1x U Disk
- 1x User Manual
- 10 x Router Bits
- Packs of screws
Just arrived yesterday and out of the box it was easy to construct. I chose this as my entry into CNC due to it's linear rails, and ballscrews (I did not wish to mess with belt systems) The instructions were clear and the labelling made the electronic connections fool proof, it took me less than an hour to have it out the box and running. The machine is fully metal in construction and feels solid and a high quality item. I can recommend this Youtube video to get you started with installing on your computer and setting the CNC up for it's first job. https://www.youtube.com/watch?v=B79OkSwSyxM&t=550s . All in all I am very pleased with my purchase
I have yet to do my for carving, but here is what I know so far: the WM3020 appears to be very well built, with an aluminum superstructure, linear rails, and ballscrews instead of belts. My only complaint is the inaccurate and insufficient information on how to set it up to do your first carving... Which file do you use? Which software (Regular or Pro?). Where do you place the block to do your first carve? Where should the spindle be before you start your first carve? How do I know the spindle won't run the bit into a clamp on my test run? All these things are probably known to an experienced CNC user, but what about all of us that know nothing! We need clearer and more concise, step-by-directions!
I went from knowing nothing about CNCs to making super tiny aluminum parts my machinist friend said would be impossible to make on this in 14 days.
Fantastic little CNC! in my opinion this is the best small CNC out there, the closest rival is the 3020 Pro max and yes this CNC is a bit more expensive then that one but trust me although the 3020 pro max is a good machine this one is worth the extra money! This is my second foxalien machine I also have a vasto and just like the vasto it's a extremely high quality, everything is well made, sturdy and it's super easy to put together. the weakest point of the machine is the motor however 300w is still good for most applications, however in I will be upgrading this in the future. If you do get this I would also recommend getting the offline controller it works perfectly and means you don't have to leave a PC or laptop connected to the machine
Did a test on some pallet wood with a 3 flute 1/8 inch endmill and it rips I programed it to run 10 in/min with .125" stepdown. I then used candle overrides to speed it up. I maxed it at 200% feed override in this video. I think it needs to run faster as it was not as happy running slow. So on the next set of tests I'm going to start at 20 in/min then go from there. I did not have any issue with clogging up the endmill when running it harder. After making the pocket I changed out for the engraving bit and engraved a Punisher skull into the bottom. I apologize for the video quality it had to be compressed to get it to send over email. 10/10 would recommend this cnc. Additionally KH Craft makes an inexpensive dial indicator with a 5/32" dovetail clamp this clamp will fit into a 4mm collet so you can check runout and get your work holding nice and square to the spindle.