Air Assist Pump Complete Kit
SKU: BD-AirAssist-Kit |
- Air Outlet Volume: 8-10L/min
- Air output adjustable.
- Can be powered directly from the controller board of the Reizer and Reizer Mega. You will need to plug the power supply when using the 4040-XE, Masuter, Masuter Pro and 3018-SE.
- The Aluminum nozzle can fit the 20W and 40W laser module.
This kit will be shipped from the China warehouse by air. It needs 7-10 days for the delivery.
This air pump is designed for engraver air assist system. The air pump is in portable size and light weight so that it can be taken to anywhere conveniently and will not take up much space. Compatible with FoxAlien Reizer, ReizerMega, Masuter, LE-4040, LE-4040 PRO and 3018-SE. Some other models need an extra 12V power adapter.
- 1x Air assist pump
- 1x Tube
- 1x Wire
- 1x FoxAlien Aluminum Nozzle
- 1x Power Supply
I very much wish I had bought this originally instead of designing one myself. The build quality is good and the results are night & day. Noise from the airpump is nominal at the next-to-highest setting and the cut quality dramatically increased thanks to the tight focus of the air jet.
This allows a 20w laser module to cut 6mm marine plywood at a fairly consistent 100mm/min.
I bought my Masuter pro, then followed it up with the FoxAlien 40 Watt laser. Then several weeks later added the air assist module...
Each one of these purchases has turned out to be stellar in performance and an amazing way for me to get started with my CNC journey and my laser engraving journey...
I was very skeptical that the air assist module would actually make any difference... But boy was I wrong... If you are thinking about lasering, either cutting or engraving, this air assist module is a must... There are certainly other ways to do it, but Fox alien has paired this perfectly with their 40 watt laser.!
It took minute to figure out the system. After that this machine, both laser and CNC have done great. Very please so far.
I have been doing laser engraving and cutting for about 2 years. I always though the addition of air assist was a frill I could do without and didn't see that it would make much difference. Boy was I wrong. This addition to my laser has proved itself on the very first project I used it on. The quality of my engraving was greatly improved. I am now running at much faster times and using less power to get better results than I ever could without air assist. If you are thinking about adding this to your set up - Do it.
It works great
This air assist pump is great. It's small, powerful enough, and not very noisy compared to other options. I've found I can cut a bit hotter and faster without any edge burn. It really helps with fine/delicate laser cuts. I also like that the air flow can be adjusted, although I keep mine full blast most of the time. Glad I purchased it.
Looks good wife wrapped as Christmas, check back later .