CNC Router Masuter Pro with 300W Spindle Kit

SKU: BD-MasuterPro-300WSP |

Free Shipping in U.S.
Fast Delivery
International Shipping Available
Lifetime Customer Support

Structure Upgrade: Masuter Pro is an All-Aluminum CNC router, which makes the machine sturdier than the last version. The Z-axis uses linear rails instead of the optical axis, this greatly improves the stability and accuracy.

Upgraded Controller Box: The control board is upgraded to a compact controller box. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance.

Compatibility Upgrade: Masuter Pro includes 2 spindle clamps: 52mm & 65mm. The 52mm clamp can accommodate the 60W spindle, 300W spindle and the FoxAlien laser modules. The 65mm clamp is for customized upgrade, such as 65mm Makita router, 1.5KW spindle, etc. Masuter Pro also supports the 69mm spindle clamp, please buy separately.

Assembly Upgrade: Main parts are pre-assembled, and the part of the wires are pre-installed to the controller box. It takes only 10-15 minutes to fully assemble.

Additional Working Light: A small working light is added to the Z-axis. It helps you to monitor the carving details and process more clearly. Each stepper motor has a knob for easy adjusting by hand.


The Masuter Pro and the 300W Spindle Kit will be shipped separately.




  • Active Working Area: 15.75” x 15.75” x 2.36” (400 x 400 x 60mm)
  • Spindle: 775; 10000RPM
  • Input Supply: 12V/5A
  • Stepper Motor: 1.3 A, 12V, 0.25 Nm torque (2.2 in lb)
  • Supported OS: Windows XP/7/8/10/11, MAC OS, Linux 


Package List

  • 1x Masuter Pro CNC Router Machine (Main part pre-installed)
  • 1x Z Probe
  • 1x Controller Box
  • 4x Hold-down Clamp
  • 1x 52mm Spindle Clamp
  • 1x 65mm Spindle Clamp
  • 1x Power Supply
  • 1x USB Cable
  • 1x U Disk
  • 1x User Manual
  • 10 x Router Bits
  • Packs of screws
  • 1 x 300W Spindle Kit

Customer Reviews

Based on 13 reviews
Marshall J Jose
Exactly as promised

The kit arrived extraordinarily well-packed, with all the tools needed to assemble the pieces soundly. All the GRBL functions were fully implemented, such that many different test pieces were cut precisely according to the CNC commands supplied. The pre-filled x-chain made assembly effortless, and the only extra effort was to tie down a few loose ends.

Attila Molnar

CNC Router Masuter Pro with 300W Spindle Kit

John Burr
Great cnc

Very impressed so far. Only issue is random screws falling out of the z axis. Not a major issue but accidentally sucked one up into my dust collector and lost it. Another one fell out, I have no clue where it came from....aside from that, I have made some great projects in the one week I've hadthe product .

Alain Legarçon
my CNC Router Masuter Pro with 300W Spindle Kit

Here is my first impression. Primo this my first CNC router so I’ve no basis for comparison Is it better or worse then the other (for the same price of course) : no idea.
Secundlo, I’ve got some trouble with the machine :
- the Y axis was wot working properly and the wheels have to be changed. Fortunately the aftersale service has been very efficient
- the MDF « spoil » boards are too flexible and MUST be reinforced by any mean (I’ll used corner iron (some € more …))
tertio : I’ve not used enough the router to evaluate the performance but it seem it will do the job and can be a good choice for the beginner especially if the two points I’ve mentioned before are resolved

franco latini
Masuter pro

Sono molto soddisfatto.


This is my first cnc, and I’ve only had it for a few days, but so far it has excelled. After a little bit of experimentation, (and several scrapped cuts) I can safely say that this machine is definitely worth your money. Just don’t forget to buy more bits if you’re carving anything! (Not that anyone *would*, of course…)

Chris Lovett
This little thing is awesome

So far it’s been flawless. I added the 300w spindle and it has handled everything I’ve tried.

Michel Gauthier
excellent machine solide et facile a assembler

excellent machine solide et facile a assembler (des instruction en francais , video,logitiel, serais un plus) exemple xtool

Richard Chadwick far.

I've only had it for about a week or so but I am having a blast with it. It works so smooth and is nice and quiet.

Gary Cox
Masuter Pro

Equipment set up went very well. I haven't had time to run any jobs yet. Product was delivered as promised and very well packed. Support staff has been a great help. Thank you

You may also like

Recently viewed