FoxAlien

[Flagship] CNC Router Machine CL-4x4

SKU: CNC-CL-4X4 |

$6,635.61 $7,630.95 Save $-995.34
Ship to:
Quantity:

Only 8 pieces in stock!

Free Shipping in U.S.
Fast Delivery
International Shipping Available
Lifetime Customer Support

[Industrial Grade Flagship CNC] The CL-4x4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, and 12mm ball screws on the z-axis.

[Most Powerful Closed Loop Stepper Motors] The CL-4x4 comes with four Nema23(60-100) closed loop steppers. These four stepper motors have up to 3.5Nm torque, which has a 60% improvement when compared to the Vasto XXL and a 10% improvement when compared with the CL-6560.

[Fast Moving Speed] It is really important to have a fast-moving speed for a full-size CNC machine. Due to the high efficiency of the closed loop motors, the CL-4x4's max moving speed can reach 5000mm/min. This is 2.5 times faster than the Vasto XXL.

[Largest Working Area & Offline Control] The CL-4x4 has up to 122cm x 122cm x 10cm/ 48” x 48” x 3.94”(XYZ) working area, it can fit standard full-sized sheets without cutting them. Build in a 2.4-inch touchscreen on the controller box. This can control the machine without connecting to a PC.

[Easy Installation] The CL-4x4 will be shipped with 6 boxes. The main parts are pre-assembled, it just takes 30-45 minutes to assemble the machine, and then you can explore the journey of CNC machining.

 

 

Description

The CL-4x4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, 12mm ball screws on the z axis & the most powerful closed loop stepper motors. It has up to 122cm x 122cm x 10cm/ 48” x 48” x 3.94”(XYZ) working area, and it can fit standard full-sized sheets without cutting them.

Specification

  • Working Table: T-slot Hybrid Table
  • Cutting Area XYZ: 122cm x 122cm x 10cm/ 48” x 48” x 3.94”
  • Spindle: 400W
  • Router:  Support 65mm and 69 Router, Makita RT0700C and DeWalt DWP611
  • X Axis: 16mm Ball Screws & Linear Rails
  • Y-Axis: 16mm Ball Screws & Linear Rails
  • Z-Axis: 12mm Ball Screws & Linear Rails
  • Stepper Motors: Nema23(60-100) Close Loop Stepper Motor
  • Torque: 3.5Nm
  • Independent Driver: DM542
  • Machine Structure Material: All Metal

Package List

  • 1x CNC router CL-4x4 (half-assembled in 6 boxes)
  • 1x T-slot Hybrid Table
  • 1x Controller
  • 2x Set of engraving bits (10pcs/set)
  • 1x USB cable
  • 1x Power cord
  • 1x Box of screws and tools
  • 1x User manual
  • 52mm & 65mm & 69mm spindle holder

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Eric Jones
The Controller PWM max output is 4.11V

The Controller PWM max output is 4.11V, Otherwise all is well. But I wish I could use my laser above 80%. I reached out to the Support with an email to see if it can be adjusted, but as of now, 3 days later, no answer. I wish there was a phone support.

G
Gary Poarch

[Flagship] CNC Router Machine CL-4x4

R
Rick Meyer

It’s still in the boxes so I cannot make a review. I won’t be able to until May of 2024.

You may also like

Recently viewed